
Description
Description
CLASSIC BONES. UNCOMMON BRAINS. QUESTIONABLE VOLUME CONTROL.
A little vintage attitude. A little American ingenuity. And a few circuit decisions that probably shouldn't work as well as they do.
The Marla Amplification ZAP1981 was built for guitarists who appreciate the sounds of classic amplifiers but aren't particularly interested in playing by the rules.
At its heart, the ZAP1981 starts with a deliberately aggressive, always-on cold-clipper preamp. From there, things get interesting. A selectable Texture stage adds another layer of saturation and character, while the High Pass, Loudness, and Low Pass controls give players an incredibly musical way to shape the amplifier's response.
But the ZAP1981 doesn't stop at the preamp.
We've taken an unconventional approach to the reverb circuit, using the 12BH7A reverb driver as the source for a dedicated Mid Boost. That means you get a clear, crisp boost that can move from a subtle bump in the mids to a seriously aggressive overdrive—all without relying on another conventional preamp gain stage.
And because one reverb setting is never enough, the ZAP1981 gives you two genuinely useful reverb levels. One for adding depth and dimension, and another for when you want the room to sound like it's having a spiritual experience.
The ZAP1981 is a collection of familiar amplifier architecture, unusual engineering decisions, and genuinely useful tools for players who want to find their own sound.
We don't know why we did some of these things. But we know you'll love the end result.
THE ZAP1981 SOUND
A PREAMP WITH A LITTLE MORE ATTITUDE
The ZAP1981 starts with an always-on moderate cold-clipper stage. This gives the amplifier its distinctive asymmetrical clipping character, creating a naturally aggressive foundation that responds beautifully to your guitar's volume and playing dynamics.
Want more? Engage the selectable Texture stage.
Texture isn't simply another gain knob. It's an additional preamp stage that can add saturation, change the character of the standard preamp, or be used to drive and color the FX Loop. It's a genuinely useful tool for players who like experimenting with signal paths and building their own gain structure.
HIGH PASS. LOUDNESS. LOW PASS.
These three controls were born on the Marla S15C and quickly became one of our favorite ways to shape an amplifier's voice. We loved them enough to bring them back for the ZAP family.
- High Pass: Controls the amount of high-frequency content moving through the preamp. Find British chime around noon, or move it forward for a fuller, more American-style breakup.
- Loudness: It doesn't amplify. It Loudifys things. Use it to find the body and response that work with your guitar and playing style.
- Low Pass: A smooth, musical way to tame or open up the top end without sacrificing the weight of your tone.
The High Pass control also features a push/pull voltage-divider function, allowing you to reduce the signal feeding the Phase Inverter. Pull it for a more brittle, JTM-inspired character, or experiment with it to help tighten up pedals that are adding unwanted mud.
TWO REVERB LEVELS. ONE VERY HAPPY GUITARIST.
VERB ON — EVERYDAY SPACE
The first reverb level is designed to add thickness, dimension, and a little splash without taking over your sound. It's the kind of reverb that makes notes feel more complete and fills the space between them.
VERB BOOST — AMBIENT MAYHEM
Need something bigger? The second reverb level drives the Dwell and Amount beyond normal reverb territory, creating a much larger ambient sound.
Think of it as adding a boost and a heavy dose of echo at the same time. Big chords, soaring leads, and tones that seem to hang around long after you've stopped playing.
Two genuinely useful reverb mix levels let you move between these sounds with a footswitch.
MID BOOST — THE STRANGE PART THAT MAKES SENSE
Why isn't the Mid Boost in the preamp section?
Because it's part of the reverb circuit. Of course it is.
The ZAP1981 sources its Mid Boost from the 12BH7A Reverb Driver, using a dry signal to create a clear, crisp boost that skips two gain stages and injects additional signal right before the Phase Inverter.
The result is a surprisingly versatile range of sounds.
At lower settings, Mid Boost adds a focused bump in the mids and pushes the amplifier in a wonderfully musical way. Turn it up and you'll find a much more aggressive voice, with enough saturation to move from a little extra body to what we like to call heavenly overdrive.
And here's the best part: Mid Boost has its own dedicated footswitch connection. That means you can arrange it alongside the Texture and Reverb switching to create combinations that make sense for your playing.
Boost and overdrive. Boost and reverb swell. Texture and ambient reverb. Your pedalboard, your rules.
OUTPUT SHAPE — FIND YOUR PLACE IN THE MIX
The ZAP1981's Output Shape control works much like a contour / presence control, allowing you to move the power section between a more focused, mid-forward response and a brighter, more pungent amplification character.
Whether you're looking for extra midrange drive or a broader response that lets your pedals and guitar do the talking, Output Shape gives you another useful place to fine-tune your sound.
FEATURES
- Always-on moderate cold-clipper preamp stage
- Selectable additional Texture gain stage
- High Pass, Loudness, and Low Pass tone-shaping controls
- High Pass push/pull voltage-divider function
- Dual reverb levels: Always-On Verb and Ambient Verb Boost
- Dedicated 12BH7A reverb-driver-sourced Mid Boost
- Independent Mid Boost footswitch control
- TRS FX Loop with separate Send and Return connections
- Output Shape control for power-section response
- Selectable half-power operation
- Multiple speaker impedance options
- Handcrafted in Asheville, North Carolina
Materials
- (1) 12BH7A
- (3) 12AX7
- (4) 6V6GC
- Hammond & Heyboer Transformers
- Orange Drop Capacitors
- Acutronics Reverb Tank
- 3/4in Solid Pine Cab
- Mojotone Greyhound 80w Speaker (in Combo)
Rear Panel & Connections
- Power Mode: Selectable half-power operation
- Half-Power Output: 22 Watts with two 6V6 power tubes removed, as specified in the owner's manual
- Speaker Outputs: Two parallel speaker connections
- Output Impedance: 2.67Ω, 4Ω, and 8Ω selections
- FX Loop: TRS connection
- FX Loop Wiring: Tip = Send / Ring = Return
- Texture & Verb Switching: TRS dual-relay footswitch
Mid Boost Switching: Shielded latching footswitch
BUILT TO BE PLAYED. NOT HUNG ON A WALL.
At Marla, we believe great amplifiers should be tools for musicians—not expensive furniture.
The ZAP1981 brings together classic tube-amplifier architecture, thoughtful circuit design, and a handful of unconventional ideas that make it genuinely fun to play. It's handcrafted in Asheville, North Carolina, with the working musician in mind.
We build amplifiers to be turned up, experimented with, loaded into vans, and played until they have stories of their own.
The ZAP family is named after Anthony's first dog, a German Shepherd mix named after Zap from American Gladiators. Because apparently naming an amplifier after an '80s television gladiator wasn't strange enough, we decided to make the circuit just as unconventional.